rockfanatics.ru → Windows

Windows 7 computer does not turn off for a long time. Why does the computer take a long time to turn off?

If computer shuts down slowly(or doesn't shut down at all), starts up slowly, or doesn't go into power saving mode, the device driver or program may be conflicting with the Windows voltage rating.

You can try using performance management tools to identify such program and device drivers.

To test performance

If a program or driver is preventing your computer from turning on quickly

You can try to solve the problem as follows:

Controlling applications that run at startup. Some programs start automatically when Windows starts. A large number of such applications can slow down your computer. To prevent programs from starting at startup and improve performance, use Windows Defender. For more information, see Stop programs from starting automatically when Windows starts.

Contact the developer program or driver update

If a program or driver is preventing your computer from shutting down quickly
You can try to solve the problem in the following way:
Close before shutting down. The problem may only occur while the program is running. Try closing the program before shutting down Windows and check if the computer now shuts down correctly.

Contact the developer programs or drivers to receive updates. A new version of the program may help solve the problem.

If these steps do not resolve the problem, the program or driver may not compatible with Windows. If you installed a program or device yourself and you no longer use it, disconnect the device or remove the driver.

When Windows is running, it is not excluded that, after finishing work, the computer does not automatically disconnect from the power supply. That is, after entering the “Start” menu, then “Shut down,” saving the settings and changing the message to “Shut down Windows,” the computer does not disconnect from the network, or the computer takes a long time to shut down.

When the mouse is active, this message can hang indefinitely, and you can disconnect the computer from the power supply only by pressing and holding the power button for four seconds. This problem most often occurs among laptop owners or after installing (reinstalling) the operating system. To eliminate this inconvenience, you can use one of the methods in which we can give some basic recommendations.

Method one , which most often helps solve this problem for laptop users. The problem is resolved by disabling the power management function of the USB hub. This function is used to save and extend battery life. But not all devices that connect to USB ports can work with it correctly. By disabling this function, the user sacrifices battery life, but the computer will shut down correctly.

right-click on the manipulator (mouse) "My computer" , and then sequentially: Properties > Hardware > Device Manager ;

unfolding "Universal Serial Bus Controllers" , right-click on the manipulator "USB root hub" , and then go to point "Properties" ;

open ;

uncheck the function and then click on "OK" .

The proposed sequence of actions must be performed with each root USB hub in this computer.

Second way . You must disable those applications and services that the system was unable to complete before the shutdown action. Check for errors in the Event Log: Start > Settings > Control Panel > Administrative Tools > Event Viewer magazines "System" And "Applications" . In some cases, the system is not able to close any of the services or applications, and if it causes a conflict, and there is no particular need for it, then you can simply disable it.

Disabling services: Start > Settings > Control Panel > Administrative Tools > Services , then a list of services should open, where you can see their brief description. Double-click on the service causing the conflict, open the window and in the tab "Are common" let's go to "Startup type" and select the function there "Disabled." To save the new settings, click on "Apply" .

Third way used to reduce the waiting time for the process of closing programs when the system enters the shutdown stage. If this arouses curiosity in anyone, you can refer to its contents:

Windows Registry Editor Version 5.00

"AutoEndTasks"="1?

“WaitToKillServiceTimeout”=”5000?

“HungAppTimeout”=”5000?

"WaitToKillAppTimeout"="5000?

First parameter value "AutoEndTasks" - closing frozen programs without warnings. The purpose of other parameters is to set the timeout for the process of closing applications and services to five seconds, rather than the default twenty.

Fourth method implies the inclusion of ACPI in the BIOS, which is applicable only in cases where an inscription appears indicating at what point it is allowed to turn off the computer's power ( “You can now turn off the computer’s power.” ). Settings are made in the BIOS, in the power management section. In some cases, the BIOS settings need to be reset and go to factory default settings. The BIOS settings menu and call keys may differ. It depends on what model of motherboard the computer is equipped with and the manufacturer. In this case, you should carefully read the manual supplied with your computer.

Many users wonder Why doesn't the computer turn off after shutting down Windows 7, 8?. There are a lot of reasons, in this article we will try to help you by looking at the most common problems and ways to solve them. Common problems include:

The computer does not turn off through start when you press the “shutdown” button (continues to function)
There is a long shutdown
The PC cannot shut down at all (the “shutdown” screen appears all the time)

User reactions in such situations may vary. Someone de-energizes the PC, and someone turns it off every time with the power button, holding it down for 5-10 seconds. These shutdown methods have a detrimental effect on the performance of your machine, and it’s not for nothing that special buttons were invented for these actions.

Let us conditionally divide the presented material into two parts. In the first, we will consider possible software problems, in the second, hardware ones. Before going through the steps below, try performing a system restore to a date before problems were noticed.

Important! Be sure to read the material. Here we consider additional methods that are no less effective, also for a stationary PC.

Computer shutdown software problems

The most common errors that prevent the computer from shutting down are incorrect operation of programs, service failures, and virus software. To try to identify the error, you can look at the stability log. To view it, expand “maintenance” in the main window, then click the stability log link.

In the stability monitor window, you can select a date and view the report from below. If you click on the error, you will receive a detailed description of it.

This way, you can identify why the computer does not turn off after shutting down or takes a long time to turn off. Follow the steps below (not necessarily in this order), the following actions will help you.

1. Based on viewing the log, uninstall the program, remove it from Windows startup, or disable the service with which errors occurred. Then reboot the system, try to turn off the computer.

If nothing has changed, use a “clean boot”, that is, launching the elements necessary only for Windows to work. In type msconfig and press enter. On the “general” tab, select “selective launch”, check the options as in the screenshot.

Visit the “services” tab, check the box at the bottom that does not display Windows services. Next, click “disable everything”, OK, “reboot”.

This diagnostic tool will definitely help you identify why your computer won’t turn off in Windows 7, 8, and what programs and services contribute to this. Run the necessary elements and get rid of the suspicious ones.

2. Scan your entire PC for malware; it is viruses that can negatively affect the stable operation of the system. Before scanning, make sure you have the latest virus database update.

3. Install Windows updates. Microsoft releases updates to resolve software and driver problems. To download update packages, go to Windows Update. When you try to turn off your computer, you will see the status of the installation process of downloaded packages, which can take quite a lot of time. Try downloading the package.

Computer shutdown hardware problems

If you have tried all the methods, and the computer does not turn off after Windows 7, 8 shuts down, then it is likely that the problem lies in the hardware. These include hardware, driver and Bios errors.

1. Remember, maybe the PC stopped turning off through startup when you installed new equipment, but there may be problems with equipment (device) that was already installed a long time ago. In this case, disconnect the device (if possible), check for correctly installed drivers, or disable the hardware in Device Manager.

In the search, type “device manager” and press enter. In the window you will see a hierarchical list of all the equipment that is installed on the computer. Go through the list looking for a yellow triangle with an exclamation mark (common) or another icon indicating a problem with the device.

Double-click on an element with an icon to go to its properties. On the General tab, in the Device Status area, the error is described. Depending on the error status, update, rollback, install the driver in Windows 7, 8 (visit the “driver” tab) or disable the device.

Right-click on the device and select “disable” from the menu. Next, click “yes”, then the device’s icon will change and it will no longer work until you turn it on.

To effectively identify why the computer does not turn off after shutting down Windows 7, 8, you can use the boot log, which lists the drivers and their status. Bring up the More Boot Options menu () by pressing the F8 key before starting Windows. Next, select “boot logging” and press enter.

After loading Windows, go to the Windows directory, use or search and find the file ntbtlog.txt, open it. Now look for any driver issues. The did not load driver status means that the driver did not work. Next, go to device manager and follow the steps described above.

2. If you have used all the methods and the computer continues to not turn off, then try the one responsible for turning the PC on and off. If after resetting the Bios settings there are no changes, then go to the website of the motherboard manufacturer, download the latest updates and update the Bios to the latest version.

That's all, all the ways to help correct shutting down the computer and on time. I strongly recommend that you follow the link about turning off the laptop in order to increase the chances of eradicating the problem.

When Windows is running, it is not excluded that, after finishing work, the computer does not automatically disconnect from the power supply. That is, after entering the “Start” menu, then “Shut down”, saving the settings and changing the message to “Shutting down windows”, the computer does not disconnect from the network, or the computer takes a long time to turn off.

Method one, which most often helps solve this problem for laptop users. The problem is resolved by disabling the power management function of the USB hub. This function is used to save and extend battery life. But not all devices that connect to USB ports can work with it correctly. By disabling this function, the user sacrifices battery life, but the computer will shut down correctly.

right-click on “My Computer”, and then sequentially: “Properties” > “Hardware” > “device manager”;

Having expanded “Universal Serial Bus Controllers”, right-click on the “USB Root Hub”, and then go to “Properties”;

open “Power Management”;

Uncheck the “Allow the computer to turn off this energy saving device” option, and then click “OK”.

The proposed sequence of actions must be performed with each root USB hub in this computer.

Second way. You must disable those applications and services that the system was unable to complete before the shutdown action. Check for errors in the Event Log: Start > Settings > Control Panel > Administrative Tools > Event Viewer, System and Applications logs. In some cases, the system is not able to close any of the services or applications, and if it causes a conflict, and there is no particular need for it, then you can simply disable it.

Disabling services: “Start” > “Settings” > “Control Panel” > “Administrative Tools” > “Services”, then a list of services should open, where you can see their brief description. Double-click on the service causing the conflict, open the window and in the “General” tab go to “Startup Type” and select the “Disabled” function there. To save the new settings, click on “Apply”.

The third method is used to reduce the waiting time for the process of closing programs when the system enters the shutdown stage. If this arouses curiosity in anyone, you can refer to its contents:

windows Registry Editor Version 5.00

"AutoEndTasks"="1?

“WaitToKillServiceTimeout”=”5000?

“HungAppTimeout”=”5000?

"WaitToKillAppTimeout"="5000?

The value of the first parameter “AutoEndTasks” is to close frozen programs without warnings. The purpose of other parameters is to set the timeout for the process of closing applications and services to five seconds, rather than the default twenty.

The fourth method involves enabling ACPI in the BIOS, which is applicable only when a message appears indicating at what point the computer's power can be turned off (“The computer can now be turned off”). Settings are made in the BIOS, in the power management section. In some cases, the BIOS settings need to be reset and go to factory default settings. The BIOS settings menu and call keys may differ. It depends on what model of motherboard the computer is equipped with and the manufacturer. In this case, you should carefully read the manual supplied with your computer.

Did you like the material? Share: Rate it: (5.00 out of 5, ratings: 3) Loading...

Return to the beginning of the article Does your computer take a long time to turn off? Let's solve this problem

AdvancedUser.ru

Windows 7 shuts down for a long time. Reasons and fixes

Every user has at least once experienced the consequences of problems in the operation of computer software. And it doesn’t matter whether the PC is used for work, for games, or as a multimedia center, the skills of quickly solving problems will make life easier for everyone. The article will discuss a rather popular question: why does Windows 7 take a long time to turn off?

Before we begin describing the causes and troubleshooting options, it must be said that the duration of the PC shutdown depends on its characteristics. The more powerful the hardware, the faster the presented procedure will be performed. The computer usually shuts down within 12-30 seconds. In addition to hardware components, the duration of the shutdown is affected by Windows parameters and settings. It is logical that if the PC hardware is not the most up-to-date, the shutdown time will be longer. However, if the computer configuration is state-of-the-art, but shutdown still takes longer than 30 seconds, troubleshooting and optimization becomes necessary.

Main reasons

Often the main reason why Windows 7 takes a long time to shut down is a large number of running programs and processes. This happens because the operating system is trying not only to close them, but also to save all their data and reports. Accordingly, more applications mean longer shutdown times.

Software conflict

The second popular reason is a software conflict. One application can interfere with the entire operating system during shutdown. And until such a conflict is resolved, the computer will not turn off, and at the same time its shutdown time will increase. You should look for the same problem if Windows 7 freezes when shutting down. Often, such conflicts occur if the program freezes or does not allow its process to be terminated forcibly. Very often, such programs are products that change the decoration and design of windows.

To begin with, before turning off the computer, try manually closing all running programs; perhaps after these steps the computer will turn off noticeably faster.

To solve this kind of problem, you need to analyze your manipulations that were performed on the computer. It is quite possible that not long ago a new driver or program was installed into the system, or a new device was installed in the expansion slot. Simply uninstalling the most recently installed programs and components is often sufficient. If that doesn't help, try rolling back to a previous restore point.

Take out the trash regularly

If the computer turns off for a long time, Windows 7 may be to blame. For example, after some time, a large amount of “garbage” accumulates in the system. This usually happens due to installing and uninstalling programs, installing updates, and a large number of restore points. Also, the OS may crash when shutting down if its system files are damaged.

To solve the problem, regularly use special utilities that clean the OS, removing remnants of previously uninstalled programs, unused drivers, and correcting registry errors. CCleaner is considered one of the best.

Malware

If the computer turns off for a long time, Windows 7 may be reacting in this way to a virus infection. They almost always work in active mode: they block system processes, do not allow themselves to be “killed,” and if the malicious program can be terminated, it immediately starts again. Very often, such viruses embed their code into system programs, and the presence of an antivirus never guarantees absolute protection.

Perform a full scan of your PC for malware with an antivirus distribution that is loaded from a flash drive or disk. The antivirus used in the system may be infected, and therefore will only create the appearance of protection. Always download only the latest versions of such applications with the latest virus databases. The most popular and effective program of this kind is Cureit.

Try to check the processes in the task manager yourself; it is quite possible that by ending the suspicious program, the computer will turn off quickly and the problematic component will be found.

Drivers

The last non-obvious reason why Windows 7 takes a long time to shut down is problematic drivers. They can be installed with errors, damaged during Windows operation, modified by viruses, even if the malicious programs were immediately removed.

Try downloading and running the DriveCleanup program, it is distributed free of charge and can be run on any Windows operating system. While running, the application removes all unused drivers from the system, and after finishing its work, you must restart the computer.

Obvious reasons

There is not enough free space on drive C. Accordingly, the computer takes a long time to turn off. Windows 7 simply does not have enough free space to record and save all settings, so the system has to first delete old temporary files. Try to increase the amount of free space, especially since Microsoft experts recommend leaving about five gigabytes unused.

You can remove programs or games that have not been used for a long time, leave only the latest system restore point, delete the update cache, and clear the Downloads directory of unnecessary files.

In addition to everything that was mentioned above, the overall stability of the operating system is affected by the dustiness of the system unit. If the radiators have not been purged for a long time, and the contacts on the RAM have not been serviced for a long time at the wiping level, the computer may begin to overheat, which leads to various types of failures.

This preventive measure can solve many problems, because programs work thanks to hardware capabilities. Often, solving a problem only by cleaning the operating system from garbage, the user forgets that garbage can accumulate in the system unit itself. This advice is especially relevant if the laptop is turned off for a long time. Windows 7, therefore, may have nothing to do with it.

fb.ru

The computer turns off for a long time, what should I do?

The problem appears to users more and more often the longer they use the computer. So, usually, the computer turns off for a long time after six months or more of using the system, sometimes earlier. It's obvious that Windows just can't handle the applications. There is a certain pattern in the number of applications and the speed of turning on/off the computer.

If the system takes longer to shut down than in previous uses, then the culprit is most likely a program that is running in the background. Also common reasons are: failures in the operating system itself, system clogging, too little memory left, and other similar situations.

Now let’s take a look at why the computer takes a long time to turn off and how to deal with it. Common causes of the problem will be presented, and only those that do not require risky action.

Why does my computer take a long time to turn off?

Usually the computer takes a long time to shut down in Windows XP or other versions due to the presence of unnecessary and heavily loading programs; less often, the cause is crashes. In fact, the topic is extensive, but it’s really easy to speed up your computer in ways that boil down to freeing up resources.

Why does my computer take a long time to turn off? – The reason is that there are many programs that operate without the user’s knowledge, perhaps a broken application. Less commonly, the root of the problem lies in faulty drivers or system infection.

To speed up shutdown, you can clean up programs by pressing Win + R and typing msconfig. Now go to Startup. Uncheck any apps that you don't use regularly. Ideally, only working applications, antivirus and drivers should remain.

At the end of the procedure, you should further clean the debris from the system. To avoid doing this manually, run a scan in the popular CCleaner utility.

Read also: CCleaner - a program for cleaning your computer from junk

Cleaning the system of unnecessary programs

You can simply delete applications that are not in demand or you no longer need, or disable their autorun. These actions will be equivalent in effectiveness (except for heavy programs), but the last option will help you save the application in case it comes in handy. So first of all check:

windows + R and msconfig;
Now uncheck the box next to unnecessary applications.

Types of computer cooling and their descriptions

Be sure to leave the drivers for sound and video, which are called Realtek and Nvidia (for Geforce), respectively. You can safely remove all other applications from autorun, since even if it turns out that you need the program, you can always return it.

Cleaning the system of debris

Quite often, a Windows 7 computer and other versions of the system shut down for a long time due to the presence of pieces of programs or applications. In other words, when you install a program, it places a lot of information on the system that is necessary for its work, and during the uninstallation process, not everything is erased. This leaves auto-updaters and their services, DirectX components, Visual C++, etc. Up to a certain point, this is not a problem, but when many such tasks accumulate, lags and similar to our situation may be noticed.

First, let's clean the system of temporary files, cache, etc. For this we will use CCleaner.

Now the search will start, when it is finished, click “Run Cleaner”.

This will help clean up the system, but the problem is not fixed yet. Now you just need to remove all unnecessary applications, then start working on services until you see an improvement.

You can remove applications:

"Control Panel" from Start;
Find the Programs and Features tile;
Move the selection to the desired position and click "Delete".

You can stop services:

On the “Control Panel”, select the “Administration” link;
Now the “Services” item;
Right-click on the desired element and “Stop”.

To kill processes, you can use the regular Task Manager, but it does not have the function of displaying the path to the executable file. Therefore, you need to use a third-party program AnVir Task Manager.

Download the utility here http://www.anvir.net/downloads/anvirrus.exe;
Launch it and you will see the same dispatcher, only more advanced. Select unnecessary processes, find executable files and delete them first in the application, then from the computer.

First of all, we are interested in programs, components and services that take up a lot of system resources and are not useful. Also a likely problem why the computer takes a long time to turn off could be useful programs that simply freeze during any action, in our case closing.

How to create a Windows 10 installation flash drive?

Removing frozen programs

Usually, it is quite simple to determine that an application has frozen; before shutting down, the window says “Waiting to close programs” and a list of them. Sometimes, the problem is more complex because a process or service is hanging, then you should first identify the cause. You can do this by viewing the logs:

1.Click the Start button and select “Control Panel”;

2.Now click on the “Administration” tile;

3.Select “Event Viewer”;

4.Open the “Custom Views” folder;

5.Click on “Management Events”.

You need to look for errors that preceded situations when the Windows 10 or other versions of the computer turn off for a long time. After identifying the culprit, uninstall/reinstall/update the application and the problem should disappear, as described in the last chapter.

Many users complain that it takes a very long time for them to shut down, you can wait for 10 minutes, and sometimes the computer doesn’t work at all. does not turn off. Speed up shutdown of a computer running Windows 7 This can be done with a minor registry edit. By default, the operating system waits until the frozen program begins to respond to requests, and if there is no response for a long time, it prompts the user to terminate it. Using the registry, you can configure Windows to close hung applications itself, and also reduce the time after which an application is considered frozen. This significantly speeds up the system and makes the user's life more comfortable.

We automatically terminate frozen processes (programs)

Press the Win+R keys simultaneously and type regedit in the window that appears. The Windows Registry Editor will open. You need to go to the registry branch:

HKEY_CURRENT_USER\Control Panel\Desktop

and change the following parameters there:

HungAppTimeout - time in milliseconds after which Windows considers the application to be frozen (set to 5000)
WaitToKillServiceTimeout - pause in milliseconds before killing a frozen program (default is 20000, but we will set it to 2000)
AutoEndTasks - if set to 0 (zero), the system will not close the application itself; if set to 1, then it will. We put 1.

Someone might say “I don’t have these parameters in the registry” and would be right. You need to create them yourself and this is a fairly easy process.

You need to right-click on the Desktop directory name in the left window of the registry and go to New - String parameter.

We assign it a name and an appropriate value. I repeat:

HungAppTimeout - value should be 5000
WaitToKillServiceTimeout - value 2000
AutoEndTasks - value 1

Attention, do not confuse the parameter name, otherwise it will not work.

After restarting the computer, the Windows 7 operating system will run much faster, and the computer will shut down much faster.

Shortcut to end stuck programs

It is also possible, which will automatically close frozen applications.

To do this, right-click on the desktop and select “Create - Shortcut” in the context menu, where copy the line into the first window:

%windir%\system32\taskkill.exe /f /fi “status eq not responding”