rockfanatics.ru → Repair

Lenovo a319 is incorrect. Repair IMEI on Lenovo

Friends, hello everyone! In this post I want to continue a little on the topic that was touched upon in. If you remember, there we flashed the Lenovo A319 smartphone, which is quite popular among the people.

So, after such manipulation, the IMEI may disappear, since the device is being formatted. What could be the consequences? Yes, the mobile network will simply be unavailable. But it is not exactly! 😉

Of course, this is a mess, so let's understand the issue, how to restore IMEI on Android after flashing. And we will do this through the engineering menu. Although I’m being a little disingenuous here, because I didn’t perform such an operation myself, since the device worked well for me after returning to life and there were no problems.

But to complete the topic, one informative video was found on YouTube, which I now suggest you watch very carefully. It will be very useful to those people who are faced with such a disaster. So, pay attention to the screen:

Some important points and codes will be given below in text form. Look, the first thing you should check is whether there really are no IMEIs in the system. To do this, type the following combination on the keyboard:

If your fears are confirmed, you need to write down the available numbers on a piece of paper so that they are before your eyes. We remember that for each SIM card the IMEI value will be unique and inimitable.

In the Lenovo A319 phone we reviewed, you can find the necessary data on the label under the battery. So let’s take it and quickly rewrite them:

Then you will need the code to enter the engineering menu. We type the following combination on the keyboard:

Then follow the path “Information-Information about CDS”:

At the next step, click on the item " Radio Information " :

Select the desired SIM card, for example, the first one:

Click on the line "AT+":

And we bring it to this form:

AT +EGMR=1.7," 12345678"

Only instead of numbers in quotes, the IMEI copied from the label should be indicated, which needs to be restored. And before the "+" sign is required don't forget to put a space. Finally, click " SEND AT COMMAND " :

That's it, the serial number on the first SIM card, lost after the Android firmware, has been restored. To do this on the second card, you should repeat the command in the "AT+" line. But there will already be some changes here. As they say, find the differences yourself:

AT +EGMR=1, 10 ," 12345678"

After confirming the data entry, be sure to restart your smartphone and check using the combination we know (*#06#) whether this instruction on how to restore IMEI on Android after flashing worked.

Well, let’s say thanks to the YouTube channel Hard Reset for the useful video and we'll say goodbye. I really hope that this information will help you quickly bring your electronic pet named Lenovo back to its original form. Bye everyone!

IMEI is a unique number that is assigned to each device and transmitted to the mobile operator’s network. The article will discuss how to restore IMEI on Lenovo devices.

The easiest way

You need to dial the following combination: *#06#. Next, an identification number or zeros will appear on the screen. To restore IMEI, you need to follow several steps, which are described below.

Mobileuncle MTK Tools program

Using this software, you can quickly restore IMEI on Lenovo devices running on the MTK processor. You need to rewrite the IMEI from the back cover of the smartphone in advance.

Important! Root rights are required for the application to function. After downloading and installing MTK Tools on your Lenovo P780 smartphone, you need to follow the steps in the video below.

Important! If your phone has two SIM cards, you will need to restore IMEI twice. The commands will look like: ALT+ EGMR=1.7, “here IMEI” for Phone 1 (you must add a space after the + sign), and for Phone 2 you need to replace 1.7 with 1.10.

After completing these steps, you need to reboot the device and check the IMEI using the key combination *#06#.

This recovery method is suitable for all devices based on the MTK processor, for example, Lenovo S660, VIBE X2, A319, etc.

After reinstalling the basic software (operating system) on an Android smartphone, the user of this device may have one problem - erased IMEI. This can happen if the firmware procedure was seriously violated, or if third-party (custom) firmware was installed, the developer of which was too lazy to implement the proper functionality in his product. If you received an incorrect IMEI after flashing the firmware, you don’t know what to do now, then read the text below.

Now we have to do the following. We'll start with one of the simplest methods. It requires a simple application, a few taps and one line. All stages are described below. The problem we are talking about here is not that unusual. You will find many articles online and many solutions to this problem will also be available with and without root access to the phone.

If not followed correctly, it may lead you to a bricked device. By any means, following our mobile flashing guides, you are solely responsible if any damage or malfunction occurs to your device or devices during or after the flashing process. Well, if you are here, then most likely you have already minimized your device already with the Format Entire Boot option, which might lead you to the problems you are looking for to fix.

It is very easy to find out that the IMEI has been changed or deleted. To do this, you will need to open the dialer and enter the command into it: *#06# . After the last character (hash) is entered, a window will appear in which the IMEI code for each SIM card is indicated. Check it (if there are several SIM cards, then these) with the code indicated on the device box. If they diverge, then indeed, after the firmware the IMEI was changed and must be specified manually.

However, you can follow along if you haven't already. Follow the steps below as directed or jump in after the break. That's it, now you can turn off your phone and turn it on. Hope this helps you with your problems. My advice is that after reading this tutorial, look up specific information about your model to check that everything is correct, but come on, the general functions are all flashed the same way. We will receive a message to accept the transaction and then a confirmation message.

We select it and give it "Open". After this last step the program will wait for you to connect the Chinese to start flashing, to connect the phone we have 2 options. On phones that cannot be removed from the battery, we have 3 connection options.

How to restore an incorrect IMEI after flashing an Android smartphone

There are several ways to change an incorrect IMEI to a correct one in Android. The first of them is somewhat complicated, but guaranteed to work on all phones, consists of entering the IMEI in the phone’s engineering menu. You can do this in the following way:

The phone will disconnect you.
The phone is turned off and the volume is pressed.
The phone is turned off and the volume button is pressed.

If you see that nothing is responding and after a minute nothing happens, try the 2nd step i.e. install the battery. If the connection is good when you plug it in, the progress bar will start moving down.

Using special programs

And minutes will complete the update and you will receive the following confirmation message. This means that the flashing was satisfactory and you only need to turn off the phone and start it normally. If you see that it takes a little time to load, don't worry, this is completely normal as the system is set up for its first launch.

Open the dialer and enter the code to open the engineering menu, for example: *#3646633# or *#*#3646633#*#* (if these codes do not work, find the combination for your phone model on the Internet);
Then you will need to go to the following points: CDS Information – Radio Information – Phone 1;
Having done this, you will see the AT+ item at the top, and in the field located below it, indicate: EGMR = 1,7, "";
After this, place the cursor between the quotes and enter your IMEI (indicated on the device box);
Click on the “SEND AT COMMAND” button to apply your changes.

Restore phone to factory settings

If you have any errors, move on to the next step in the tutorial. And we give "Reset factory data" and then "Reset phone". In short, it's a pleasure to write for you, and especially if it helps you, we will see a new analysis in a few days.

If these methods don't work, check if you have a valid serial number. Don't run the program yet. Unplug your phone and turn it off. Select update drivers manually, then point to this folder. Check the bottom of the window to make sure the flash was successful.

On some phones, after pressing the specified button, the following error message may pop up: “This command is not allowed in UserBuilld.” Nothing wrong with that. Just in the line you entered, place the cursor after the “+” symbol, add a space and apply the settings.

To restore the IMEI for the second SIM card (if you have one), you will need to close the engineering menu, repeat all the above steps, but instead of EGMR=1.7 you need to enter EGMR=1.10, and in quotes you will need to indicate the IMEI for the second SIM- cards.

Spell checking in TinyMCE

Video instructions: recovery via the engineering menu

Close the barcode download window.

Spell checking in TinyMCE

It will be successful if you see the following. If the connection was successful, proceed to step. Turn off your phone and repeat steps 5 until. At the bottom of the pop-up window, mark the barcode. Enter the serial number obtained from the back of the phone.

After completing these steps, you will need to reboot your phone. When the smartphone turns on, the IMEI will be sewn in, and, therefore, the GSM module should work normally.

Correcting incorrect IMEI after flashing using ROOT rights

The other option is much simpler, but it requires ROOT rights and installation of a special application. The application is called Chamelephon, and can be downloaded from Google Play Market.

Having Ruth and the application, you will need to go to the latter (while giving all the permissions that it asks) and indicate IMEI in special fields. If for some reason you are unable to find out your IMEI, you can generate a new one. After this, restart your phone. After this, the incorrect IMEI will change to correct after flashing.

Spell checking in TinyMCE

The convenience of the TinyMCE visual editor is not much overshadowed by the lack of spell checking of the edited text, which makes it difficult to write articles without errors and typos.

The display of the latest articles of the "Articles" module (article) on the main page in CMS Danneo 1.5.4 is implemented by the b-Article block and allows you to display the number of articles specified in the block configuration.

On the main page of the "Articles" module (article), in addition to the list of categories, a list of recent publications is displayed; the number of articles displayed is set in the module settings. When viewing a certain category, articles are displayed with a pagination.

After reinstalling and configuring the system, messages began to arrive in the mail:

Cron test -x /usr/sbin/anacron || (cd / && run-parts --report /etc/cron.daily)

When installing phpMyAdmin on a server with MySQL Server 5.7 installed, an error is displayed on the "Privileges" tab:

Warning: Your privilege table structure seems to be older than this MySQL version!
Please run the script mysql_fix_privilege_tables that should be included in your MySQL server distribution to solve this problem!

Manual recovery

Dial *#06# on your Android phone. If the IMEI code does not appear on the screen, then you urgently need to restore it. You can find the identification number on the box, in the instructions, or under the battery. If the smartphone supports dual SIM cards, then two IMEI numbers must be specified.

Manual IMEI repair on Android:

If the number above does not work, try the following options:

If your Android supports two SIM cards, then you need to repeat the procedure for restoring the identification number. For the second SIM card the command will be: AT+EGMR=1.10,“IMEI”.

After recovery, you need to exit the engineering menu and reboot the phone. After turning on, dial *#06# again to check IMEI. If the number is not displayed, then to correct the error you will need an Android IMEI repair program.

Software recovery

If manual recovery did not help solve the problem of missing identifier after flashing, then try using the MTK65xx.zip program.

After rebooting the device, dial *#06#. The device identification number lost after the firmware update will be restored. If the above methods did not help you figure out how to restore IMEI on Android after flashing, then try another option:

Using Root Browser, move the MP0B_001 file to the /data/nvram/md/NVRAM/NVD_IMEI/MP0B_001 directory. After transferring the data, restart your phone and check the identification number again - this time it should be displayed correctly.